您的位置:首页 > 主营业务 > 皮革表带折曲老化试验 Leather Watch Band Flexural Aging Test

主营业务

皮革表带折曲老化试验 Leather Watch Band Flexural Aging Test

适用范围 Scope of Application:
 
用于检验、测试手表皮革表带抗折曲性能。
 
This test method is applicable for evaluating the flexural fatigue resistance of leather watch bands under repeated bending stress.
测试依据 Test Basis
 
设备供应商提供的测试方法 :
 
Testing shall be performed in accordance with the equipment manufacturer’s validated protocol.
 
测试范围 Test Parameters:
 
计数器:(0~999999)次
压力表:(0~10)Bar
时  间:(0~6)s
 
InstrumentRangeTolerance
Cycle Counter0–999,999 cycles±1 count
Pressure Gauge0–10 Bar±0.05 Bar
Cycle Duration0–6 seconds/cycle±0.1s
 
 
根据行业标准或客户认可的标准,调整计数器,设置好测试的折曲次(行业内通常设定为2000次)。
Adjust the counter according to industry standards or client-approved specifications, setting the required flex cycles to 2,000 cycles (standard industry benchmark).
 
结果判断 Result Evaluation:
 
观察表带表面的状况,如果发现有裂纹、表皮脱落、断裂等现象出现,则判为该项目不合格。
 
The test specimen shall be deemed non-compliant if any of the following surface defects are observed:Cracks, Delamination, Fractures.